DHCPv6
Chargement du visualisateur PDF…
Texte extrait du document (pour la recherche)
[Page 1]
R&T
IPV6, T.Nguyen 1 /52
Cours Réseaux :
SLAAC/DHCPv6
[Page 2]
R&T
IPV6, T.Nguyen 2 /52
IPV6
Introduction
Principes
NDP-RA
DHCPv6
Configuration IOS de base
TP
[Page 3]
IPV6, T.Nguyen 3 /52
R&T
IPv6 : Adressage Dynamique
NDP
– RA annonces du
routeur
• Par défaut SLAAC
• Bit M (Manage) =
DHCPv6
• Bit O (Other) =
Stateless DHCP
[Page 4]
IPV6, T.Nguyen 4 /52
R&T
Prefix Information Option
Prefix Information Option (Type 3)
Fields and Meaning
Field Size Meaning
Type 8 bits Value = 3 (Prefix Information)
Length 8 bits Length of the option (always 4, i.e. 32 bytes)
Prefix Length 8 bits Length of the IPv6 prefix (e.g., 64
for /64)
L (On-link flag) 1 bit 1: the prefix is considered
on-link (local network)
A (Autonomous flag) 1 bit 1: the
prefix can be used for autonomous address configuration (SLAAC)
Reserved 6 bits Reserved (set to 0)
Valid Lifetime 32 bits Time during which the prefix is
valid
Preferred Lifetime 32 bits Time during
which the prefix is preferred for creating new addresses
Reserved2 32 bits Reserved (set to 0)
[Page 5]
IPV6, T.Nguyen 5 /52
R&T
[Page 6]
R&T
IPV6, T.Nguyen 6 /52
Ipv6 avec PIO
A=1 SLAAC
– NDP
O=1 StateLess DHCP
– NDP
– Autres infos (DNS) avec DHCPv6
M=1 Statefull DHCP
– Tout en DHCPv6
A=1 et M=1
SLAAC et DHCPv6
[Page 7]
R&T
Mode opératoire en
DHCPv6
[Page 8]
R&T
Configuration Statefull DHCP
[Page 9]
R&T
[Page 10]
R&T
Configuration Stateless
[Page 11]
R&T
[Page 12]
R&T
[Page 13]
R&T
IPV6, T.Nguyen 13 /52
Conclusion
Concepts de Base
– SLAAC/NDP
– Stateless DHCP
– Satefull DHCP
– Relais DHCP
Configuration en IOS
TP
📝 Tester ses connaissances
1. Dans un message Router Advertisement (RA), que signifie le bit M (Managed) positionné à 1 ?
2. Quelle est la différence entre le DHCPv6 « Stateless » et le DHCPv6 « Stateful » ?
3. Que se passe-t-il quand les bits A=1 et M=1 sont tous les deux positionnés dans le RA ?
4. Par quel protocole les Router Advertisements (RA) et le mécanisme NDP sont-ils transportés ?